Does Airplane Mode Turn off GPS Location On Tecno Spark 10 5G?

Airplane mode is a feature available on all smartphones and other electronic devices that stops the signal transmissions from the Tecno Spark 10 5G devices. Also known as flight or airplane mode, this feature will disconnect the wireless functions, including cellular connection, Wi-Fi, and Bluetooth.

The feature’s name says that it was introduced to cut off any radio transmission during the flight to avoid any communication interference. However, the feature must be enabled while taking a flight, and if you need to be disconnected from the signals, you can even use the feature outside the plane.

If you have enabled airplane mode on your Tecno Spark 10 5G or Android device and think it will also block your GPS location, you are wrong. Know why airplane mode does not turn off GPS location and other ways to avoid getting tracked with or without Airplane Mode.

Part 1: Does Airplane Mode Turn off location?

As we mentioned above, while you put your phone on airplane mode, the cellular radio, Wi-Fi and Bluetooth is disabled, but not the GPS location.

The GPS works on a different technology where the signals are received from the satellite and are not dependent on the network or cellular services. So, when the airplane mode is enabled, the GPS location is not turned off.

Part 2: Can Your Location Be tailed on Airplane Mode?

Yes, if you have not disabled the GPS feature, your location can be tailed on an Airplane mode as the flight mode only disables the cellular connection and Wi-Fi. So, it can be concluded that Airplane Mode is no solution for stopping the GPS tracking on your phone, though there are other workarounds available for this.

Part 3: How to Prevent Phones from Being Tailed?

The GPS feature of your phone, besides assisting you, is also a way any person or third-party app can keep track, which can hamper your privacy and be annoying. So, for privacy or any other reason, if you are looking for ways to prevent your phones from being tailed, check out the solutions for iDevices and Android below.

3.1. How to stop GPS tracking on Tecno Spark 10 5Gs?

To hide the location on your Tecno Spark 10 5G and iPad, below listed are the steps.

Step 1. Open the Control Center on your iDevice, iPhone 13 for example. (For iPhone X and above models, swipe down from the top-right, while on other devices, swipe from the bottom of the screen)

Step 2. Enable the Airplane Mode or turn off the Wi-Fi and Cellular icon.

Step 3. Next, you need to disable the GPS radio. On some of the Tecno Spark 10 5G devices, there is a separate setting for this. Go to Settings > Privacy> Location Services. The list of the apps using the location services will appear. Move the toggle at the Location Services to turn it off.

3.2. How to stop GPS tracking on Android Devices?

The process to turn off GPS location on Android devices may vary from device to device and brand to brand. Still, the commonly used steps for turning off the location are listed below.

Step 1. On your Tecno Spark 10 5G, swipe down on your screen to open the options list.

Step 2. Search for the Airplane icon and click on it to turn on the Airplane Mode.

Step 3. Next, open the App Drawer and then choose Settings > Location. Turn off the Location.

Part 4: Spoof Location to prevent GPS Tracing without Turning on Airplane Mode

If you are looking for a method that can prevent GPS tracking without turning on Airplane Mode, spoofing your location is a workable solution. To get this task done, you would need a specialized app or a tool, and here we recommend Dr.Fone - Virtual Location as the best option.

Using this excellent tool, you can set any fake location across the globe for your Android or iOS device, which will prevent you from being hacked. The tool works on almost all models and brands of devices and is quick and hassle-free.

Key features of Dr.Fone Virtual Location

• Teleport to any location of your choice and set a fake GPS location.
• Works with all iOS and Android devices,
• Allows simulating GPS movement with the route.
• Works with all location based-apps like Snapchat , Pokemon Go , Bumble , and others.
• Available for download on Windows and Mac.

You can check out this video for further instruction.

Steps to spoof and set fake location on Android or iPhone using Dr. Fone-Virtual Location

Step 1. Download, install and launch the Dr. Fone software on your Windows or Mac system.

Step 2. On the leading software, tap on the Virtual Location option and then connect your Tecno Spark 10 5G or Android device to your system using a USB cable.

Step 3. Click on the Get Start button.

Step 4. The software will open a new window, and your connected device’s actual location will be shown. If the location is not coming correctly, tap on the Center On icon present in the lower-right of the interface.

Step 5. Next, in the upper-right corner, click on the teleport mode icon. Next, enter the desired location at the upper left-hand side that you wish to teleport to. Finally, click on the Go button after entering the site.

Step 6. A pop-up box will appear to click on the Move Here button to set the selected location for the connected device. The place will appear on the app interface and the phone.

Part 5: People Also ask about Airplane Mode

Q1: Can An iPhone Be Traced While off?

No, it cannot be traced when an iPhone or any other phone is switched off. For example, when an iPhone is switched off, its GPS is not activated, and thus it cannot be traced.

Q2: Does Find My iPhone Work on Airplane Mode?

No, the Find My iPhone feature does not work in Airplane mode because the location services need a network connection, and thus in Airplane mode, the Tecno Spark 10 5G device is offline, and it isn’t easy to track the Tecno Spark 10 5G device.

Q3: Does airplane mode turn off life360

Life360 is a helpful app for tracking your friends, family, and other people. This app tracks your GPS location and displays it to all the selected members in a circle. When the airplane mode on your device is enabled, the network will be disconnected, and thus Life360 will not be able to update your location to the members in the circle. Therefore, during airplane mode, Life360 will not update your site.

Wrap it up

So, it can be concluded that Airplane Mode disconnects you from the cellular network and Wi-Fi. Therefore, to stop getting traced, you need to disable your location services along with the airplane mode. Using Dr.Fone - Virtual Location is an excellent alternative to stop the GPS location as the software will help you set a fake location, and your actual location will remain hidden from all.

safe & secure

The Best 8 VPN Hardware Devices Reviewed On Tecno Spark 10 5G

In today’s world, it is highly recommended to use a VPN while using the internet. Although it helps us access geo-restricted content, it can also strengthen our security. Besides using a VPN software, you can also use a VPN hardware as well. For instance, a hardware VPN for home use can be connected to your network and let all the Tecno Spark 10 5G devices enjoy its benefit. To help you pick an ideal hardware VPN, we have come up with this guide. In this post, we have compared various Amazon hardware VPN options and have handpicked the top 8 of them for you.

If you want to use a hardware VPN for your home or business needs, then you can certainly meet your requirements with these options.

1. Cisco Systems Gigabit Dual WAN VPN

If you have already used Cisco products in the past, then you won’t face any trouble using this Amazon hardware VPN as well. It provides a wired connection with its 14 different LAN ports.

• Load balancing is supported by its dual gigabit Ethernet WAN ports
• Has an inbuilt SSL (Secure Socket Layer) and SPI (Stateful Packet Inspection) firewall.
• It is quite easy to perform its setup, as it comes with an intuitive GUI setup wizard.
• You can analyze employee productivity as it can manage different users at once.
• It is an advanced IP Security VPN hardware.
• The data transfer rate is 100 Mbps
• Warranty: 90 days

Price: $172

Buy it here

2. Zyxel Next Generation VPN Firewall

This VPN hardware by Zyxel will help you meet your business needs for sure. It is one of the most secure devices that you can try to get an access to around 100 VPNs.

• The hardware VPN supports up to 60 thousand sessions at the same time
• Provides an SHA-3 encryption
• It supports a speed of 300 Mbps VPN and 1 Gbps firewall
• Provides a dual-WAN fallback and failover support
• Besides IPSec, it includes SSL tunnels as well (IPv6 is also supported)
• Layer 2 Tunneling Protocol for mobiles (Android, iOS, and Windows phones)
• Warranty: 2 years

Price: $450 (for 100 VPNs), $950 (for 300 VPNs), and $1350 (for 1000 VPNs)

Buy it here

3. GL.iNet GL-AR150 Mini Travel Router & VPN

If you are looking for an affordable hardware VPN for home use, then you should check this portable VPN router by GL.iNet. Since it is lightweight and portable, you can carry it anywhere and use it as per your needs.

• It has an inbuilt OpenVPN and TOR client.
• This mini router provides an access to over 20 different VPN services.
• You can either use its adapter or any laptop/power bank to use it.
• Weight: 1.41 oz
• Dual Ethernet ports
• 64 MB RAM and 16 MB flash ROM

Price: $22

Buy it here

4. UTT HiPER 518 VPN

It doesn’t matter if you like to use VPN for your home network or small business, this Amazon hardware VPN will come handy to you on numerous occasions. It comes with a quick setup wizard as well to assist you.

• The hardware VPN supports real-time backup
• Inbuilt load balancing feature
• Several advanced features like native firewall, access control, IP binding, NAT, and more
• 5 VPN tunnels can be used
• Has an auto negotiation and auto MDIX property
• It has 2 10/100M WAN ports and 10/100 LAN ports
• Ethernet connectivity with 100 Mbps data transfer rate
• Warranty: 1 year

Price: $40

Buy it here

5. Dell Sonicwall TZ300 VPN

Another secure Amazon hardware VPN that you can try is from the house of Dell. Even though it is a high-performance router, you might need to walk an extra mile to setup its VPN compared to other products.

• The VPN hardware is optimized for Windows, Mac, and Android users
• It has an inbuilt SSL encryption.
• Comes with an anti-virus, anti-spyware, and intrusion prevention technology
• Supports IPSec and USB connectivity

Price: $554

Buy it here

6. Linksys Business Dual WAN VPN Router

This hardware VPN router by Linksys is majorly designed for small and medium-sized offices. This site-to-site VPN supports Ethernet connectivity and has a remarkable data transfer rate of 1000 Mbps.

• It provides 110 Mbps IPSec and 900 Mbps firewall
• There are 5 OpenVPN tunnels dedicated to iOS and Android devices
• Besides that, it has 50 site-to-site IPSec tunnels
• Inbuilt features like WAN failover and load balancing

Price: $165

Buy it here

7. D-link 8-port Gigabit VPN Router

This router by D-link is an ideal pick for hardware VPN for home use and small offices. It supports Green Ethernet to optimize its power needs as well.

• VPN tunnel integration – 25 IPSec and 25 PPTP/L2TP tunnels
• It has 8 LAN (Gigabit) ports and 1 WAN (Gigabit) port
• Additionally, it has 5 SSL tunnels and 10 GRE tunnels
• Easy to configure, the VPN firewall comes with its GUI interface
• Administrations can also block websites with its dynamic web content filtering feature
• Limited lifetime warranty

Price:  $130

Buy it here

8. TP-Link SafeStream VPN Router

This Amazon hardware VPN by TP-Link is one of the most popular Gigabit VPN routers out there. It comes in numerous versions as well and can be upgraded as per your requirements for a hardware VPN for home use.

• Supports 20 IPSec and 16 PPTP VPN tunnels
• Also has 4 Gigabit LAN and 1 Gigabit WAN port for high connectivity
• Advanced encryption techniques including AES128, AES192, AES256, DES, and 3DES with MD5 and SHA1 Authentication
• Also provides Manual and IKE Key Management
• DoS defense protection (with SPI firewall)
• Warranty: 1 year

Price: $57

Buy it here

Alternative: Set Up VPN on Common Hardware Devices

With any of the above VPN hardware devices, you can set up reliable VPN services in your home or office.

But many of them come with a high price, and may prove to be expensive for some individual users.

So, for a common PC, phone, router, Android TV, etc., how to set up VPN in a more affordable manner?

Many users choose NordVPN to do it for the following reasons:

• Supports 6 devices at the same time.
• VPN service can be set up on Windows, Mac, Android, iOS, Linux, and a wide range of routers.
• 24 / 7 customer service available.
• VPN service provider for large companies like CNN and BuzzFeed.
• As low as roughly 3 USD per month.

Now when you know about the various options for hardware VPN for home use and business purposes, you can easily pick a VPN hardware of your choice. We have listed different kinds of options in this post, helping you make up your mind. You can always visit their Amazon page and get more information about them. Go ahead and pick the hardware VPN of your choice and let us know about it as well.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

3uTools Virtual Location Not Working On Tecno Spark 10 5G? Fix Now

The map frequently breaks or 3uTools is unable to retrieve it. This is because 3uTools is unable to establish a connection with the Google Maps API. Additionally, if your internet connection is unreliable, this may happen.

There isn’t much you can do if this is the reason why your 3uTools virtual location isn’t working this is a technical problem that can only be fixed by a technical expert. You could try restarting 3uTools and performing the spoofing process again to update it. You might also try switching to “Mapbox” and see if it solves the issue.

Let’s have a look at the possible working solutions for the 3utools Virtual Location Not Working problem.

Part 1: What is 3uTools VirtualLocation?

A program that can help someone manage their device is known as 3uTools. You can set a virtual location on your iPhone, iPad, or any other iDevice using the VirtualLocation option in the program. In addition, you can broadcast the location on social media and get around service and game area restrictions.

To set up 3uTools, there are only a few steps to take.

• Step 1: Set up 3uTools on your computer first.
• Step 2: Connect your iPhone to the PC on which you installed 3uTools in Step 2.
• Step 3: Launch 3uTools and choose the Toolbox option from the top menu in step 3.
• Step 4: Select the VirtualLocation icon from the toolbox.
• Step 5: A new window will open. You can enter the longitudes and latitudes of the location you want to set in the window.
• Step 6: Click the Modify virtual location button after entering the pertinent coordinates. You can notice the new location after a little period of time.

Tips: Is 3uTools Virtual Location not working? Don’t worry, we’ve got the solution! Dr.Fone - Virtual Location offers a seamless and reliable virtual location experience. Say goodbye to issues and hello to hassle-free location changes. Fix it right now with Dr.Fone - Virtual Location!

Part 2: Fix 3utools Virtual Location Not Working Issue [8 ways]

1. Solving the internet issues

Many times, 3uTools is unable to load the map, or the map crashes. The reason for this is that 3uTools is unable to connect to the Google Maps API. This can also occur if your internet connection is unstable.

If this is the cause of your 3uTools virtual location not working, there isn’t much you can do because this is a technical issue that can only be resolved by a technical expert. You might try relaunching 3uTools and repeating the spoofing procedure to refresh it. You may also try changing to “Mapbox” to see if it addresses the problem.

2. Restarting and Closing the Software

When all of the aforementioned options fail, a decent option is to close the software and restart it after a few minutes. This is because the software frequently encounters an error, which is resolved when you close the software, making this a viable choice. We would also advise you to go to the Task Manager after closing the software and End Task it.

3. 3uTools reinstallation

The most common cause of any software not working is poor installation. Some crucial files or components of the software are left behind as a result of faulty installation. As a result, reinstallation or the usage of a different location spoofing program is the only choice remaining.

4. Restarting Your Computer

Restarting your computer is another easy option that many 3uTools users have found useful. If your virtual location feature stops working, simply close the app and restart your computer. This would delete the software from the Random access memory, as well as any bugs or errors that were preventing it from working.

5. Verifying the network connection and that the phone is unlocked

When you encounter a ‘not working’ problem when using the 3uTools software, the first thing you should do is check to ensure that your internet is operational and that there are no interruptions in your connections. You can resolve this by troubleshooting your internet and ensuring that its wire is correctly hooked in, as well as ensuring that your phone is already unlocked.

6. Checking that all dependent components have been downloaded

Another major reason why many individuals experience problems with the 3uTools program is a lack of necessary components. While dependent components are normally downloaded along with the software, this is not always the case. As a result, it is critical to check that you have downloaded all necessary components to ensure that the software works properly.

7. Changing the Source Map

Users frequently report that the map is not loaded. The maps on the 3uTools software fail to load as soon as users activate the virtual location option. You can attempt “Load embedded maps” to solve this issue.

Alternatively, change the source map between Google Maps and Open Street Maps.

8. Uninstalling iTunes and rebooting your system

Many customers have reported encountering the “3uTools virtual location developer image load failed” problem, with the majority of them appearing to be iOS 17 users. 3uTools either does not load the location images or the screen becomes frozen.

Remove iTunes from your computer. Then, try restarting it. Install iTunes from the App Store once more. Restart your computer. After that, connect your iPhone to a PC and confirm that it is unlocked.

Part 3: Best 3uTools Virtual Location Alternative Program You Can Use in 2024

Stop fretting if you frequently encounter the 3uTools virtual location not working problem despite attempting various fixes. The Dr.Fone - Virtual Location is one of the best 3uTools alternatives that is still available.

The Dr.Fone - Virtual Location, a leader in the fake GPS market, is a well-reviewed and user-friendly location changer. You can easily modify your location by doing a simple drag and click. be it the adaptability, usability, or precision of the instrument. Dr.Fone is the best since it contains everything. The following are the steps to use Dr.Fone - Virtual Location to change location.

Dr.Fone - Virtual Location

The best 3uTools virtual location alternative!

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Step 1: Open the Dr.Fone - Virtual Location application

safe & secure

To begin, you must download Dr.Fone - Virtual Location (iOS/Android). Install and execute the software after that.

Select “Virtual Location” from the drop-down option to connect your iPhone or Android phone to your PC. From the drop-down option, choose “Get Started” to begin the virtual location function.

If you’re playing Pokemon Go on your mobile, connect it to a computer system. When you open the Dr.Fone application, the terms and conditions will be displayed. Read them carefully, accept them, and then click ‘Get Started.’

Step 2: Teleport to any destination

You will be directed to a website that displays a global map as well as your current location on the globe. You may simply zoom in and out to get a better sense of the coordinates and location. ‘Teleport Mode’ should be selected in the upper right corner of the page.

Step 3: Practice moving between different locations

After that, you can change your current location to wherever you wish to go. This could be as close as a neighboring country or as far away as a different country. If you’re playing Pokemon Go, keep it nearby. Then choose ‘Move Here.’

Step 4: Observe the location change

Your location will immediately change, and the new location will be registered on all sites you visit within a few minutes. So you’re good to go!

You can watch the video below to fix 3uTools location issue with Dr.Fone - Virtual Location!

Conclusion

Now you have read about possible working solutions for 3uTools Virtual Location Not Working problem, you may not be able to implement each of them or find the reasons behind what’s happening. The simplest thing that you can do in this regard to get your problem solved immediately is to use Dr.Fone - Virtual Location which is a well-reviewed and user-friendly location changer.

safe & secure