Does Airplane Mode Turn off GPS Location On Tecno Spark 20 Pro?

Airplane mode is a feature available on all smartphones and other electronic devices that stops the signal transmissions from the Tecno Spark 20 Pro devices. Also known as flight or airplane mode, this feature will disconnect the wireless functions, including cellular connection, Wi-Fi, and Bluetooth.

The feature’s name says that it was introduced to cut off any radio transmission during the flight to avoid any communication interference. However, the feature must be enabled while taking a flight, and if you need to be disconnected from the signals, you can even use the feature outside the plane.

If you have enabled airplane mode on your Tecno Spark 20 Pro or Android device and think it will also block your GPS location, you are wrong. Know why airplane mode does not turn off GPS location and other ways to avoid getting tracked with or without Airplane Mode.

Part 1: Does Airplane Mode Turn off location?

As we mentioned above, while you put your phone on airplane mode, the cellular radio, Wi-Fi and Bluetooth is disabled, but not the GPS location.

The GPS works on a different technology where the signals are received from the satellite and are not dependent on the network or cellular services. So, when the airplane mode is enabled, the GPS location is not turned off.

Part 2: Can Your Location Be tailed on Airplane Mode?

Yes, if you have not disabled the GPS feature, your location can be tailed on an Airplane mode as the flight mode only disables the cellular connection and Wi-Fi. So, it can be concluded that Airplane Mode is no solution for stopping the GPS tracking on your phone, though there are other workarounds available for this.

Part 3: How to Prevent Phones from Being Tailed?

The GPS feature of your phone, besides assisting you, is also a way any person or third-party app can keep track, which can hamper your privacy and be annoying. So, for privacy or any other reason, if you are looking for ways to prevent your phones from being tailed, check out the solutions for iDevices and Android below.

3.1. How to stop GPS tracking on Tecno Spark 20 Pros?

To hide the location on your Tecno Spark 20 Pro and iPad, below listed are the steps.

Step 1. Open the Control Center on your iDevice, iPhone 13 for example. (For iPhone X and above models, swipe down from the top-right, while on other devices, swipe from the bottom of the screen)

Step 2. Enable the Airplane Mode or turn off the Wi-Fi and Cellular icon.

Step 3. Next, you need to disable the GPS radio. On some of the Tecno Spark 20 Pro devices, there is a separate setting for this. Go to Settings > Privacy> Location Services. The list of the apps using the location services will appear. Move the toggle at the Location Services to turn it off.

3.2. How to stop GPS tracking on Android Devices?

The process to turn off GPS location on Android devices may vary from device to device and brand to brand. Still, the commonly used steps for turning off the location are listed below.

Step 1. On your Tecno Spark 20 Pro, swipe down on your screen to open the options list.

Simple and intuitive video editing
🎬 Nero Video:
The powerful video editing program for your Windows PC

Step 2. Search for the Airplane icon and click on it to turn on the Airplane Mode.

Step 3. Next, open the App Drawer and then choose Settings > Location. Turn off the Location.

Part 4: Spoof Location to prevent GPS Tracing without Turning on Airplane Mode

If you are looking for a method that can prevent GPS tracking without turning on Airplane Mode, spoofing your location is a workable solution. To get this task done, you would need a specialized app or a tool, and here we recommend Dr.Fone - Virtual Location as the best option.

Using this excellent tool, you can set any fake location across the globe for your Android or iOS device, which will prevent you from being hacked. The tool works on almost all models and brands of devices and is quick and hassle-free.

Key features of Dr.Fone Virtual Location

• Teleport to any location of your choice and set a fake GPS location.
• Works with all iOS and Android devices,
• Allows simulating GPS movement with the route.
• Works with all location based-apps like Snapchat , Pokemon Go , Bumble , and others.
• Available for download on Windows and Mac.

You can check out this video for further instruction.

Steps to spoof and set fake location on Android or iPhone using Dr. Fone-Virtual Location

Step 1. Download, install and launch the Dr. Fone software on your Windows or Mac system.

Step 2. On the leading software, tap on the Virtual Location option and then connect your Tecno Spark 20 Pro or Android device to your system using a USB cable.

Step 3. Click on the Get Start button.

Step 4. The software will open a new window, and your connected device’s actual location will be shown. If the location is not coming correctly, tap on the Center On icon present in the lower-right of the interface.

Step 5. Next, in the upper-right corner, click on the teleport mode icon. Next, enter the desired location at the upper left-hand side that you wish to teleport to. Finally, click on the Go button after entering the site.

Step 6. A pop-up box will appear to click on the Move Here button to set the selected location for the connected device. The place will appear on the app interface and the phone.

Part 5: People Also ask about Airplane Mode

Q1: Can An iPhone Be Traced While off?

No, it cannot be traced when an iPhone or any other phone is switched off. For example, when an iPhone is switched off, its GPS is not activated, and thus it cannot be traced.

Q2: Does Find My iPhone Work on Airplane Mode?

No, the Find My iPhone feature does not work in Airplane mode because the location services need a network connection, and thus in Airplane mode, the Tecno Spark 20 Pro device is offline, and it isn’t easy to track the Tecno Spark 20 Pro device.

Q3: Does airplane mode turn off life360

Life360 is a helpful app for tracking your friends, family, and other people. This app tracks your GPS location and displays it to all the selected members in a circle. When the airplane mode on your device is enabled, the network will be disconnected, and thus Life360 will not be able to update your location to the members in the circle. Therefore, during airplane mode, Life360 will not update your site.

CalendarBudget - Monthly subscription membership to CalendarBudget via web browser or mobile app. Support included.

Wrap it up

So, it can be concluded that Airplane Mode disconnects you from the cellular network and Wi-Fi. Therefore, to stop getting traced, you need to disable your location services along with the airplane mode. Using Dr.Fone - Virtual Location is an excellent alternative to stop the GPS location as the software will help you set a fake location, and your actual location will remain hidden from all.

safe & secure

How to Fix My Tecno Spark 20 Pro Location Is Wrong

GPS navigation has changed a lot of the things that we do on a day-to-day basis. It has alleviated all the concerns that you would usually have before going to do an errand, visiting a new location, or going on a road trip with your friends. Instead of planning your route a few days in advance, you can find the safest route with just a few taps on your phone, giving you more time to focus on other things.

While using your phone to track your current location, you might have noticed that it is not showing you the correct location. It will confuse you but it does happen from time to time, and there will be fixes that you can do get to track properly. There are also multiple factors that you will need to consider when you encounter an issue where your phone has shown you a completely different location compared to where you are. We will talk about those possible issues and how you can fix them and get them to work properly again.

Part 1: Why is My Location Wrong on My Tecno Spark 20 Pro?

As we have mentioned earlier, there are multiple reasons why your location is not being tracked accurately by your phone. We understand how crucial to ensure that the location is accurate, especially if you are using this to send someone something or if you plan to go somewhere.

Power Tools add-on for Google Sheets, 12-month subscription

Reason #1: The location services are disabled on your phone

The most basic common reason as to why your current location is wrong is that you could have disabled the GPS or location services on your phone.

Reason #2: Internet connectivity on your mobile is unstable

Another common issue as to why your location is wrong on your phone is that your mobile’s connectivity is unstable. This could be due to your mobile provider, or the location that you currently are in might not have any stable internet connection and is causing your location to be wrong.

Jutoh is an ebook creator for Epub, Kindle and more. It’s fast, runs on Windows, Mac, and Linux, comes with a cover design editor, and allows book variations to be created with alternate text, style sheets and cover designs.

Reason #3: Your mobile phone might not be updated

Another reason your phone has the incorrect location would be that your phone is updated to the latest software update. The software update will usually include fixes to the old software update’s bugs.

Reason #4: The “Location Services” might not be enabled for the application

If you have not enabled the application to use the GPS, then it will not show you the correct location. Make sure to check whether this application can access the “Location Services” by following the steps below.

vMix Pro - Software based live production. vMix Pro includes everything in vMix 4K plus 8 channels of Replay and 8 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Part 2: How to Fix Tecno Spark 20 Pro Location Accuracy Issue?

Now that you know the possible causes of why you have an incorrect location, we will not share with you the fixes that you can do to get a more accurate location when you use your phone.

Option #1: Enable the “Location Services” on your phone

To fix the wrong location issue, you will need to check that your “Location Services” are turned on. You can enable the “Location Services” by following the steps below.

• Step 1: Go to “Settings” and choose “Privacy”.
• Step 2: After, you can look for “Location Services” and enable it.

Option #2: Update your iOS to the latest update

It is important to regularly update your phone with the recent software updates to prevent any inaccurate locations on your phone.

• Step 1: Go to “Settings” and look for “General”.
• Step 2: Look for “Software Update”, from there you will see whether you have the latest iOS. If your phone is not updated, then you can go ahead and update it.

Option #3: If you are using another application, make sure that the application is updated as well

Similar to your iOS, the application needs to also be updated, so double-check if the application needs to be updated as well. You can do this by going to the App Store and checking if the application needs to be updated and if it does, do update the app and you can retry tracking your location after.

Option #4: Enable the “Location Services” for your phone

Double-check if the location services are turned on on your phone so it will show you an accurate location.

• Step 1: Open the “Settings” on your phone and scroll down to look for “Privacy” then tap on it.
• Step 2: Next, click on “Location Services” and check to see whether the location is turned on. If it is turned on, turn it off and back on again.

Bonus Tip: Easy Way to Fake Your GPS Location on Tecno Spark 20 Pro (NO Jailbreak)

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

If you have exhausted all of the tips that we have shared above and still the location is incorrect, you can try an alternative fix with our product, “Dr. Fone - Virtual Location”. With this, you can share a temporary or fake location with anyone without needing to do jailbreaking for your phone.

“Dr. Fone - Virtual Location” (https://drfone.wondershare.com/virtual-location-changer.html) allows you to share or use a fake location with your friends. You can use this application as a temporary fix for the incorrect location on your phone, security, or your location-based AR games or applications. Using this application is also easy and requires just a few steps. You can use this application by following the steps below.

• Step 1: Download the “Dr. Fone - Virtual Location” software on your laptop. Open and choose “Virtual Location”.

Power Tools add-on for Google Sheets, Lifetime subscription

safe & secure

• Step 2: You can then connect your phone to your computer and click on “Get Started”.

• Step 3: You will then be redirected to your current location on the new page.
• Step 4: If you want to change your location, you will need to turn on the “Teleportation” mode by clicking on the first icon and typing the location that you want then click on the “Go” icon.
• Step 5: Click on “Move Here” and your current location will show up as the location that you typed on Your Tecno Spark 20 Pro.

You can watch the video below to fix your Tecno Spark 20 Pro location with Wondershare Dr.Fone

Conclusion

There are the things that you can do when you have an incorrect location on your phone. If you ever encounter any issues with inaccurate locations in your Tecno Spark 20 Pro, you can try all of the tips and fixes that we have shared in this article. You can also send a fake or spoof location to your friends in case you cannot get the incorrect location fixed immediately by using our product, “Dr.Fone - Virtual Location ”, one of the most safest and reliable tools for fake locations. You can ensure the privacy and safety of your location and your phone.

safe & secure

Methods to Change GPS Location On Tecno Spark 20 Pro

The Internet is a vast space and you have a plethora of content on different websites and platforms. You can call it a two-way - give and take relationship when it comes to the dynamics of data exchange between the world wide web and the users.

When you visit websites, they use cookies to track your activities. When you visit a restaurant, the phone detects and saves the GPS in the memory. You click a picture in the Maldives, your phone seeks out geographic points to prepare the right time and date stamps.

You need your GPS to download and use certain apps. Similarly, your GPS might be the reason you are unable to play some games or use some applications. Change GPS Location Tecno Spark 20 Pro and this won’t be a problem for you.

But if you are wondering how can I change my location on my iPhone? These 5 methods will help you get fruitful results.

Part 1: Change GPS Location on Tecno Spark 20 Pro using a Professional PC Program

The PC Programs are entirely Software based and do a tremendous job to spoof Tecno Spark 20 Pro iOS 16 Location . You don’t have to buy any new equipment and you will be operating using your computer.

You can get this done within minutes if you have the right program with you. One of the best options in the market is Wondershare’s Dr.Fone. This is how you use Dr. Fone Virtual Location spoofer for GPS Spoofing iPhone.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Step 1: Go to the official website of Dr.Fone - Virtual Location (iOS) . This is easily available when you google it or you can also follow this link here. Then you can download the executive file, install and then launch the application. Once the home page opens, you will find several options - Opt for ‘Virtual Location’. It is usually at the bottom of the page.

Step 2: Now take your Tecno Spark 20 Pro device and connect it to the computer that has Dr. Fone. Then click on ‘Get Started’.

Screensaver Factory, Create stunning professional screensavers within minutes. Create screensavers for yourself, for marketing or unlimited royalty-free commercial distribution. Make screensavers from images, video and swf flash, add background music and smooth sprite and transition effects. Screensaver Factory is very easy to use, and it enables you to make self-installing screensaver files and CDs for easy setup and distribution. Screensaver Factory is the most advanced software of its kind.

Step 3: Now, the world map will display on the screen and you can clearly see the coordinates and directions as well. On the top right corner, the third icon is called the ‘Teleport Mode’. Click on that and enter the name of the place in the search box. You can even pinpoint it, if you are sure about the place.

Step 4: If you are completely sure that you got the address right, click on the ‘Move Here’ option. It moves your Pin from your present location to your new virtual location.

If you are looking for a way to change Tecno Spark 20 Pro Location without Jailbreak, then this is one of the safest options for you. Also, you have other additional features like Phone Transfer, and Whatsapp Transfer along with Location spoofing. The application will never go to waste, won’t occupy much of your computer/PC/Laptop’s space and you can get the fake location iOS within minutes.

Part 2: Change GPS Location on Tecno Spark 20 Pro using External Device

You can achieve the iOS Spoof Location using External devices as well. These devices do not cause any inconvenience to you. They are meant to be small, fit into the lightning port of your iPhone, and act as an external source that will spoof the Tecno Spark 20 Pro location and the same will reflect in every app that uses or detects your iPhone’s geographic location.

The best external device to change phone location Tecno Spark 20 Pro is Double Location Dongle. This simple device can be utilized by following the steps below -

Step 1: The Double Location Dongle is a very small, white rectangle that connects to your iPhone’s port. But along with it, you also have to install the Companion app for location spoofing. Once you have both of them ready, connect the Tecno Spark 20 Pro device to your iPhone.

Note: The Companion App is not available on the App store. You have to download it from Double Location’s official website.

Step 2: The next step is to open the Double Location iOS companion app and then settle on the Map Tab.

Step 3: Unlike what we had seen in the Dr. Fone step, we cannot enter the location into any search box. You should move the pin to the location that you want to virtually shift to. Double Location provides some very good options that will help you during gaming. You can change all the appropriate settings and proceed.

WinUtilities Pro

Step 4: On the bottom of the screen, Go for the lock position option. Once you do that, there will be a virtual shift in your geographic position and all your apps will register your new coordinates.

Part 3: Change GPS Location on Tecno Spark 20 Pro using XCode

You can change the geolocation Tecno Spark 20 Pro by using your coding expertise as well. That is why XCode exists. This Computer Program lets you change your Location in Tecno Spark 20 Pro by giving some GIT Commands to the PC while your Tecno Spark 20 Pro stays connected to it. By following these steps, you can understand how to do it. But if you’ve never had a liking for programming and coding languages, then you should probably skip this -

Step 1: Download and install XCode from the AppStore, directly to your Mac device. Launch the application.

PaperScan Professional： PaperScan Scanner Software is a powerful TWAIN & WIA scanning application centered on one idea: making document acquisition an unparalleled easy task for anyone.

Step 2: Once you see the XCode window open, Go for the ‘Single View Application’ to start a new Project and go on by clicking on ‘Next’. You can set up a name and details for this particular project.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

Step 3: A screen display will appear asking you about your identity. This is where the minimal coding part starts. You need to enter some GIT Commands to continue with the project.

ZoneAlarm Pro Antivirus + Firewall NextGen

Step 4: Launch and run the terminal on your Mac device and enter these commands - git config –global user.email “[email protected]“ and git config –global user. name “your name”.You need to add your own details in the quoted space and continue to verify your identity.

Step 5: Once you enter the commands, go to the next step and establish the Development Team. Then you can proceed to connect your Tecno Spark 20 Pro device to your Mac device. Use the normal cable to do that.

Step 6: To allow the program to process the Symbol Files, you will have to choose the model of your device. Go to the ‘Build Device’ option and continue as per the prompts. However, make sure that you keep your Tecno Spark 20 Pro unlocked for quick detection by the computer software.

Step 7: Once that is done, you can come back to the actual location spoofing part. Go to the debug Menu > Simulation Location and specify the exact location that you want to virtually shift to. Once you are okay with it, the same will reflect on your Tecno Spark 20 Pro as well.

Part 4: Change GPS location on Tecno Spark 20 Pro using Cydia Location Faker App

Cydia is also based on software applications and changes location in seconds, However, you need to note that you have to jailbreak your phone. If you don’t know how to do it or do not want to take the risk, Cydia’s LocationFaker app may not be the right fit for you. But if you are a jailbreak expert, this is a very comfortable GPS Changer for iPhone.

Step 1: Download the Cyndia LocationFaker app from the official website. LocationFaker8 is available for the iOS 8.0 model.

Any DRM Removal for Win：Remove DRM from Adobe, Kindle, Sony eReader, Kobo, etc, read your ebooks anywhere.

Step 2: After launching the app, enter the virtual location into the search box.

DLNow Video Downloader

Step 3: If you are done with choosing the new location, shift the toggle from ‘OFF’ to ‘ON’ at the bottom of the page.

Step 4: Now we can decide which apps can access our new virtual location. At the bottom of the page, you will find an ‘i’ icon. Go click on it and choose the ‘White List’ option. This one will then take you to the app list and you can decide which of them will have access to the phone’s location.

Part 5: Change GPS Location on Tecno Spark 20 Pro using Location Handle

Location Handle is another useful application that you can use to change your location by a few meters or simply go with an automated movement system that changes your location gradually as if you are moving from one place to another. This is how you use it -

Step 1: Download the Location Handle app from the website or App store

Step 2: There are four different types - Normal Mode - teleport to a new location; Offset Mode - Move a few feet away from the present location ; Automatic Mode - Slowly change your location from one point to another, as if walking ; Manual Mode - Change your location using a joystick.

Step 3: Consider the Manual mode, because we want to change location to a far-off place and not necessarily for gaming.

Step 4: Once the Manual mode is activated, the map will be displayed and you can change the pin location. You can enter the location name in the search box.

Step 5: The Joystick will appear on the page and you can use it to shift your location to wherever you want. Once you fix on the location, proceed and the new location will be updated.

Conclusion

We hope you are no longer wondering How to change Location services on Tecno Spark 20 Pro. These 6 methods are very effective and you can always opt for the one that is most comfortable for you. If you want a hassle-free PC program, we have that narrowed down for you. If you are a coding enthusiast, then we’ve listed a method that best fits you. Whatever the reason, with an iOS Fake GPS, life becomes much easier and sometimes even safe on the internet. You can explore beyond the boundaries without moving from your couch!