Does Airplane Mode Turn off GPS Location On ZTE Nubia Z60 Ultra?

Airplane mode is a feature available on all smartphones and other electronic devices that stops the signal transmissions from the ZTE Nubia Z60 Ultra devices. Also known as flight or airplane mode, this feature will disconnect the wireless functions, including cellular connection, Wi-Fi, and Bluetooth.

The feature’s name says that it was introduced to cut off any radio transmission during the flight to avoid any communication interference. However, the feature must be enabled while taking a flight, and if you need to be disconnected from the signals, you can even use the feature outside the plane.

If you have enabled airplane mode on your ZTE Nubia Z60 Ultra or Android device and think it will also block your GPS location, you are wrong. Know why airplane mode does not turn off GPS location and other ways to avoid getting tracked with or without Airplane Mode.

Part 1: Does Airplane Mode Turn off location?

As we mentioned above, while you put your phone on airplane mode, the cellular radio, Wi-Fi and Bluetooth is disabled, but not the GPS location.

The GPS works on a different technology where the signals are received from the satellite and are not dependent on the network or cellular services. So, when the airplane mode is enabled, the GPS location is not turned off.

Part 2: Can Your Location Be tailed on Airplane Mode?

Yes, if you have not disabled the GPS feature, your location can be tailed on an Airplane mode as the flight mode only disables the cellular connection and Wi-Fi. So, it can be concluded that Airplane Mode is no solution for stopping the GPS tracking on your phone, though there are other workarounds available for this.

Part 3: How to Prevent Phones from Being Tailed?

The GPS feature of your phone, besides assisting you, is also a way any person or third-party app can keep track, which can hamper your privacy and be annoying. So, for privacy or any other reason, if you are looking for ways to prevent your phones from being tailed, check out the solutions for iDevices and Android below.

3.1. How to stop GPS tracking on ZTE Nubia Z60 Ultras?

To hide the location on your ZTE Nubia Z60 Ultra and iPad, below listed are the steps.

Step 1. Open the Control Center on your iDevice, iPhone 13 for example. (For iPhone X and above models, swipe down from the top-right, while on other devices, swipe from the bottom of the screen)

Step 2. Enable the Airplane Mode or turn off the Wi-Fi and Cellular icon.

Step 3. Next, you need to disable the GPS radio. On some of the ZTE Nubia Z60 Ultra devices, there is a separate setting for this. Go to Settings > Privacy> Location Services. The list of the apps using the location services will appear. Move the toggle at the Location Services to turn it off.

3.2. How to stop GPS tracking on Android Devices?

The process to turn off GPS location on Android devices may vary from device to device and brand to brand. Still, the commonly used steps for turning off the location are listed below.

Step 1. On your ZTE Nubia Z60 Ultra, swipe down on your screen to open the options list.

Step 2. Search for the Airplane icon and click on it to turn on the Airplane Mode.

Step 3. Next, open the App Drawer and then choose Settings > Location. Turn off the Location.

Part 4: Spoof Location to prevent GPS Tracing without Turning on Airplane Mode

If you are looking for a method that can prevent GPS tracking without turning on Airplane Mode, spoofing your location is a workable solution. To get this task done, you would need a specialized app or a tool, and here we recommend Dr.Fone - Virtual Location as the best option.

Using this excellent tool, you can set any fake location across the globe for your Android or iOS device, which will prevent you from being hacked. The tool works on almost all models and brands of devices and is quick and hassle-free.

Key features of Dr.Fone Virtual Location

• Teleport to any location of your choice and set a fake GPS location.
• Works with all iOS and Android devices,
• Allows simulating GPS movement with the route.
• Works with all location based-apps like Snapchat , Pokemon Go , Bumble , and others.
• Available for download on Windows and Mac.

You can check out this video for further instruction.

Steps to spoof and set fake location on Android or iPhone using Dr. Fone-Virtual Location

Step 1. Download, install and launch the Dr. Fone software on your Windows or Mac system.

Step 2. On the leading software, tap on the Virtual Location option and then connect your ZTE Nubia Z60 Ultra or Android device to your system using a USB cable.

Step 3. Click on the Get Start button.

Step 4. The software will open a new window, and your connected device’s actual location will be shown. If the location is not coming correctly, tap on the Center On icon present in the lower-right of the interface.

Step 5. Next, in the upper-right corner, click on the teleport mode icon. Next, enter the desired location at the upper left-hand side that you wish to teleport to. Finally, click on the Go button after entering the site.

Step 6. A pop-up box will appear to click on the Move Here button to set the selected location for the connected device. The place will appear on the app interface and the phone.

Part 5: People Also ask about Airplane Mode

Q1: Can An iPhone Be Traced While off?

No, it cannot be traced when an iPhone or any other phone is switched off. For example, when an iPhone is switched off, its GPS is not activated, and thus it cannot be traced.

Q2: Does Find My iPhone Work on Airplane Mode?

No, the Find My iPhone feature does not work in Airplane mode because the location services need a network connection, and thus in Airplane mode, the ZTE Nubia Z60 Ultra device is offline, and it isn’t easy to track the ZTE Nubia Z60 Ultra device.

Q3: Does airplane mode turn off life360

Life360 is a helpful app for tracking your friends, family, and other people. This app tracks your GPS location and displays it to all the selected members in a circle. When the airplane mode on your device is enabled, the network will be disconnected, and thus Life360 will not be able to update your location to the members in the circle. Therefore, during airplane mode, Life360 will not update your site.

Wrap it up

So, it can be concluded that Airplane Mode disconnects you from the cellular network and Wi-Fi. Therefore, to stop getting traced, you need to disable your location services along with the airplane mode. Using Dr.Fone - Virtual Location is an excellent alternative to stop the GPS location as the software will help you set a fake location, and your actual location will remain hidden from all.

safe & secure

How To Teleport Your GPS Location On ZTE Nubia Z60 Ultra?

While playing games like Pokemon Go, you are in desperate need of finding more Pokémon. If so, changing your location is a necessity that needs to be figured out. For that, teleporting the GPS location of the ZTE Nubia Z60 Ultra device is the optimal solution. To carry this out, Wondershare Dr.Fone - Virtual Location provides a perfect system for fake locations.

Part 1: Teleport to Anywhere in the World (Teleport Mode)

Note: Once you teleport or move to a virtual place, you can restore to the actual location by restarting the ZTE Nubia Z60 Ultra device. You will see a prompt that reminds you to restart your device to restore the location of the connected device when you close the Virtual Location. Click Restart Device and close the program.

* Dr.Fone Mac version still has the old interface, but it does not affect the use of Dr.Fone function, we will update it as soon as possible.

The Teleport Mode offered in Virtual Location is a great way to change the location of iOS/Android devices. If you wish to show a different location to someone else, the best way is to use this mode on Virtual Location. This can be done by following the steps described below:

Step 1Activate Teleport Mode

Once you have connected your smartphone, continue to select the Teleport Mode option from the top-right section. The particular icon is represented by the first icon from the left in that section.

Step 2Add Location To Teleport

After activating Teleport Mode, click the search bar on the top-left to type in the location where you want to shift. After adding the location, hit Enter to proceed.

Note: If you can’t find your current location when searching spots on the map, you can click the Current Virtual Location icon on the right sidebar to show your current virtual location.

Step 3Confirm the Location For Teleporting

You will be directed to the particular, and the map will display it for confirmation. If you are willing to teleport to this specific location, click Move Here.

Step 4Location Successfully Changed On Computer

The location of the smartphone will be instantly changed to the selected location and will be displayed on the map.

Step 5Location Changed On the Smartphone

Open your smartphone and access its maps application. Look into the current location of the ZTE Nubia Z60 Ultra device and verify it to be the same as the changed location on the computer.

Part 2: Instantaneous Movement Between Multiple Points (Jump Teleport Mode)

Wondershare Dr.Fone - Virtual Location also allows the movement of the smartphone device between multiple places with the Jump Teleport Mode. If you want to make your location spoofing look realistic, the steps below will be beneficial:

Step 1Activate Jump Teleport Mode

You will have to first access the Jump Teleport Mode option from the second icon from the left in the top-right section. This can be done after teleporting the location of the smartphone device.

Step 2Set Spots to Jump Teleport

Continue to select the spots you want to pass one by one on the map by simply tapping on them with your mouse. After selecting multiple spots, click the Start Moving button at the bottom of the left panel to start the movement.

Step 3Change Location Between Set Spots

As prescribed, you can propagate amongst the set spots with the Jump Teleport Mode. Use the Next Point and Last Point buttons to shift your location.

How To Use Special Features - Virtual Location On ZTE Nubia Z60 Ultra?

Wondershare Dr.Fone - Virtual Location comes with multiple unique features that can be used to enhance the flow of spoofing location. With all these amazing features, you can easily change your iOS location without blinking an eye. Rather than making things complicated, Dr.Fone makes it easy for you to manage operations when you perform actions like changing Android locations.

Part 1: Circle Route (For Multi-Stop Route)

The circle route feature is under the multi-stop route mode. When your starting point is close to the ending point, a pop-up asks if you want to set up a circle route. Click Yes to create a circular path on the map.

Part 2: Realistic Mode (For One-Stop Route and Multi-Stop Route)

This particular feature makes the simulation look realistic with the ability to fluctuate the speed of the simulation. If you wish to turn on realistic mode for the one-stop or multi-stop route, look for the respective checkmark option in the panel on the left.

Part 3: Fluctuation Mode (For Teleport Mode)

Whenever you are teleporting your smartphone device to another location, you can try using the fluctuation mode feature offered against it. As you activate Teleport Mode from the top-right section and search for a location, you will discover the Fluctuation Mode toggle in the confirmation tab. Turn on the toggle to slightly switch the location from the selected point to show realistic motion.

Part 4: Cooldown Timer (For Teleport Mode and Jump Teleport Mode)

While teleporting the location of your smartphone to different places for playing games like Pokemon Go, you are bound to activate a cooldown timer within your location-changing app to show realistic movement. By locating the Cooldown Timer on the right pane of icons, activate it, and this feature will automatically calculate the cooling time by measuring the distance between your destination and the starting point.

It is recommended not to start the movement until the cooldown time is completed to avoid unnecessary bans. Moreover, you can also activate the Auto jump after cooldown in the Jump teleport mode after turning on the Cooldown Timer.

This option will automatically jump you to the next destination once the timer ends. It is helpful for games like Pokemon Go, where the game servers can detect frequent jumps with no cooldown time.

Part 5: Import/Export GPX File

You can also import and export specific navigated locations from Dr.Fone in the form of GPX files. While you can export GPX files for keeping a record of your location, you can also import such files for inserting specific locations to simulate or teleport to. Find out how you can import and export GPX files with this location-changing application:

Step 1Export the GPX File

If you have defined a proper location to simulate at a particular instant using Dr.Fone - Virtual Location, you can have this location exported by clicking the Export icon on the top of the left panel. This will open a window where you can set the location for saving the GPX file.

Step 2Import a GPX File

For importing a GPX file on the platform, click the Import button on the right pane. As this opens a window, select the GPX file you wish to import to the platform.

Step 3Wait for the File to be Read

Wait for a moment until Dr.Fone - Virtual Location recognizes the specific locations within the GPX file and displays them on the map.

Part 6: Historical Records

If you want to use a similar track record on your smartphone again, you can access the historical records saved on the platform for easy access.

Step 1Open Historical Records

Click the Historical Records button on the right pane to access the entire history involving the connected smartphone and the location spoofing platform.

Step 2Access Any Location from the History

Select the Go button adjacent to any particular historical record to re-launch a similar simulation for the ZTE Nubia Z60 Ultra device. You can also click Clear All to delete all historical records.

Part 7: Favorite List

You can also set up favorite locations within the platform to define quick accessibility to your favorite locations. To do that, you have to follow the guidelines shown next:

Step 1Favorite Specific Locations

While setting up locations in Jump Teleport Mode, One-Stop Route, or Multi-Stop Route, you can tap on the Favorite icon adjacent to every marked location or favorite an entire route with the Favorite icon on the top of the left panel.

Step 2Access your Favorite Section

To look for your favorite locations, look for the Favorite icon on the right pane to open a list containing all locations you have marked. You can choose the Move option to automatically move into a particular location in no time.