How to Fix Life360 Shows Wrong Location On Tecno Pova 5?

Life360, the app for family and friends, allows you to see where your loved ones are when you open the app. The app shows the current location of your contacts and will tell you the last time they were seen and if they are in an emergency.

However, there’s a good chance that you’ve seen this message multiple times: “Your phone is missing from Life360. Please contact your cellular carrier and try again”. This message indicates that your phone is not connected to the internet.

As a result, your contacts, photos, and messages are not showing. Life360 may be using cellular data instead of Wi-Fi, but it’s not certain. To avoid this, let us read what we should know.

Part 1: Why is Life360 Location Wrong?

Interference From Nearby Devices/Networks

In some cases, Life360 may not be able to determine the location of your device because it is being interfered with by other nearby devices or networks. For example, if you have an iPhone or iPad, it may be using the same cell tower as your Tecno Pova 5.

The Life360 app has to use the closest available cell tower to determine your location. So if another device uses the closest tower, Life360 will use that instead.

Poor Signal

A poor signal in a particular region, particularly if you’re commuting, is the most common cause of Life360’s incorrect location. When your phone is in a poor signal area, the app will use the internet instead of cellular data to determine the location of your contacts.

Therefore, it is important to keep an eye on the network lines to determine whether or not this is indeed the source of the problem that prevents your Life360 from being found.

To get more information about how often does life360 update location, read about the Life360: Learn How Everything Works!

Part 2: How to Fix Life360 Shows Wrong Location Issue?

There are several ways to fix the Life360app problems that life360 not updating its location. Let’s check them out one by one.

Method 1: Review the Internet settings

The weak internet access contributes to the location display’s unreliability in life 360. If you notice that life360 is displaying the wrong location, you should examine your Internet connection settings to prevent life360 from displaying an inaccurate location.

Switch off the option that saves power and then turn on the wireless Internet connection.

You may turn off your smartphone’s power-saving mode by heading to the status bar and selecting the appropriate option.

Please note that this is just for Android users. Also, do not forget to consider that your Android smartphone’s settings may vary from those listed below.

The “switch off low power mode” option may be found in the “Settings”> “Battery” menu on an iOS device.

Android users should also follow this procedure if life360 displays an incorrect location. For battery conservation, numerous programs are disabled when the low power state is engaged.

Method 2: Double-check Your Current Location in the Settings

If life360 shows the incorrect location, the smartphone’s location services significantly come into play. The location settings must be activated to prevent the life360 location issue, and the current program must be updated accordingly.

Scrolling horizontally on the status bar on an Android device is all that is required for consumers to visit the website. Of course, you can also run the software in the background, which may be accomplished in a variety of straightforward but distinct ways based on the Tecno Pova 5 device’s model.

You may access the Background App Refresh function by going to the settings menu on your iOS device and selecting “Settings,” followed by “General,” and then selecting “Background App Refresh.” Next, launch the location services function by navigating to “Settings”> “Privacy”> “location services” and selecting “Location Services” from the drop-down menu.

After that, touch on the symbol that represents Life360, as shown below; this will take you to a screen where you may change “Allow Location Access” to “Always” and “Enable Precise Location.”

Method 3: Connecting One Device at a Time

Only one device may be used to sign in to the Life 360 app at a time. To prevent the life360 false location problem, log out of all other devices and use just one. When many devices are logged into Life 360 simultaneously, the user’s location might be incorrectly determined.

If you want reliable results, you must be logged in from the same device. If you use numerous devices simultaneously to log in to Life360, it will report incorrect location errors for each one. Therefore, it is possible to get inaccurate data. Use a single device to log into life360 to prevent the issue of a wrong location showing up.

Part 3: How to Keep Your Location on Life360 in One Place?

Two of the most important and easy ways to keep your location on life360 in one place are:

1. Stopping both Wi-Fi and Cellular Data Transmissions

If you disconnect from the internet, Life360 will no longer work, and your last known position will be shown.

Because all other applications are disconnected, this solution has a significant drawback: it prevents alerts, instant messengers, and other applications from working properly. In addition to the fact that you’re unable to use the internet, people in your circle will notice something wrong. In addition, it may not be adequate to fake your location.

Those with an iPhone have the advantage of being able to disable the usage of cellular data directly inside the application’s settings. However, those with an Android device will need to resort to other approaches.

iPhone users may access the Cellular setting by going to the Settings app and tapping on it. This will switch off the cellular data for the Life360 app. Turn off Life360 by swiping the switch to the off position mentioned above. Life360 will not be able to provide an accurate location report for you so long as there is no Wi-Fi access.

Advantages:

• You can use only one device to connect to the internet.
• No need to manually switch between apps.
• You can easily manage all your data.

Disadvantages:

• You cannot use other devices at the same time.
• If you lose the connection, you need to reconnect.

2. Faking Your Location

It seems like everyone has their own way to try and fiddle with their location in real life. Some may use satellite images or even old maps and coordinates, while others will buy old phones and ship them to a random location. Whatever your method is, it’s probably not the best one out there.

However, a fast but secure option is the use of Dr.Fone - Virtual Location , which is the best virtual location application right now. You canuse it to change your location to any place on earth.

One of Wondershare’s most popular products, Dr. Fone, is a data management and recovery tool. It is compatible with both iOS and Android smartphones, and it comes packaged with a wide variety of control toolkits.

When it comes to faking a location on iOS devices, Dr. Fone- Virtual Location (iOS) is one of the most effective solutions currently available on the market. It is possible to use it to teleport the iOS device to any location in the globe with just one click, and all you have to do is input the address of the place to which you wish to be moved.

Simulating GPS movement from one place to another or along a predetermined course is also possible by simply picking locations on a map that you want to go through.

Using Dr. Fone-Virtual Location iOS, you can customize your route by selecting how many times you want to go through it and how fast you want to relocate it.

To free yourself from any hassle, consider using a third-party tool instead, such as Dr.Fone, which will make the entire process super easy and accurate.

Advantages:

• The application is easy to install and use.
• It doesn’t require you to go through a lot of settings.

Disadvantages:

• • It is not a mobile application.

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Conclusion

Life360 has released a major update for Android and iPhone users, fixing the shows being sent to the wrong location. This has caused many problems for many users and is a rather annoying problem to fix. However, you can get help from Dr.Fone - Virtual Location (iOS/Android) application which is an absolute fix to all of your problems.

4 Methods to Turn off Life 360 On Tecno Pova 5 without Anyone Knowing

Life 360 has made tracking our friends and loved ones so easy. It is an excellent choice for staying updated about family when you have security concerns. Despite this, it can be intrusive when you need your privacy. If you’re a group member and wonder how to turn off Life360 without parents knowing on iPhone and Android devices, you’re in luck. This article will provide you with a complete guide on how to turn off Life 360 without anyone knowing.

Part 1: What is Life 360?

Many applications are available today to help family and friends track each other for various purposes. One such app is Life360, and it has been successful since its launch. This tracking app makes it easy to trace the location of your loved ones or anyone you want to track. But, first, you need to create a circle of friends on a map.

Life360 works by sharing your GPS location on the map, allowing the members of your circle to view it. As long as your GPS location is turned on, those in your circle will always have access to your exact location. Life360 developers are continually releasing new features to improve their tracking function.

Some of the available Life360 features include notifying you when a member of your circle moves to a new point and it will send a help alert when there’s an emergency. In addition, the app automatically contacts the emergency contacts you added when you do this. However, this doesn’t change that it can get intrusive when you need some privacy. That’s why the next section covers how to turn Life360 off.

Part 2: How to Turn off Life360 without Knowing

There are times when you want to turn Life360 off without it showing so that people don’t know your present location. But, if you have no idea how to go about it, you’re in luck. This section covers the best methods to stop sharing your location with friends and family on Life360.

1. Turn Off Your Circle’s Location on Life360

There is the possibility of limiting the details about your location to others in your circle. One way to turn Life360 without anyone knowing is by choosing a circle and disconnecting from them. The steps below break down the entire process.

• First, launch Life360 on your device and navigate to ‘settings.’ You can find it at the bottom right corner of the screen.
• Next, choose a circle you want to stop sharing your location with at the top of the page.

• Tap on ‘location sharing’ and click on the slider next to it to disable location sharing.

• Now you can recheck the map, and it will show ‘location sharing paused.

2. Turn off Your Tecno Pova 5’s Airplane Mode

Another option you have to stop sharing location on Life360 is by switching on Airplane mode. You can do this on your Android and iOS devices. Once you enable Airplane mode, you’ll see a white flag on your last saved location.

For your iOS devices: open ‘control center’ and tap on the ‘airplane mode’ button. Alternatively, you can go to settings and tap on ‘airplane mode’ to switch it on.

For Android owners wondering how to turn location off on life360 through Airplane mode, swipe down from the top of your screen and select the ‘Airplane mode’ icon. You can also turn it on by visiting ‘settings’ and selecting ‘network & internet’ from the option displayed. Finally, find the airplane mode and switch it on.

These steps will help you turn off location sharing on Life360. However, the downside of using Airplane mode is that it prevents you from accessing the internet. In addition, with the Airplane mode turned on, you can’t make or receive phone calls, either. Therefore, we don’t recommend this as your top choice when learning to turn off Life 360.

3. Disable GPS Service on Your Device

Another top method of turning off Life360 is disabling the GPS service on your device. It is an effective option, and you can carry it out on your iOS and Android devices. Below, we’ll break down the steps of doing this on your Android and iOS devices.

For iOS

iOS users can easily turn off GPS services by following the steps we’ll be providing below.

• First, open Settings on your smartphone.
• Next, locate the ‘personal’ category and tap on ‘location services’ from the options displayed.
• Next, disable GPS location services

For Android

You’re not left out of this option; below are the steps to disable GPS service on your Tecno Pova 5s.

• Firstly, visit ‘settings’ on your device.
• On the menu, scroll to ‘privacy’ and tap on it.
• It will open a new page. Select ‘location’ from the options provided.
• If you want to disable GPS services on your Tecno Pova 5, turn off location tracking for apps.

Part 3: Best Ways to Fake Location on Life360 without Anyone Knowing-Virtual location [iOS/Android Supported]

Although Life360 can be helpful in emergencies or security issues, it can also prove quite problematic. If you want some privacy or don’t trust members of your circle, you might want to learn how to turn off Life 360. The problem with turning off the Life360 location is that members of your circle might notice, which would inevitably cause some conflict.

Fortunately, you have another effective option, and that is by faking your GPS location using a location spoofer. You can display the location you want while keeping your true location safe on Life360. Dr. Fone –Virtual location is an excellent tool for faking your location.  

Dr.Fone - Virtual Location

1-Click Location Changer for both iOS and Android

• Teleport from one location to another across the world from the comfort of your home.
• With just a few selections on your computer, you can make members of your circle believe you’re anywhere you want.
• Stimulate and imitate movement and set the speed and stops you take along the way.
• Compatible with both iOS and Android systems.
• Work with location-based apps, like Pokemon Go , Snapchat , Instagram , Facebook , etc.

3981454 people have downloaded it

Steps to Fake Location Using Dr. Fone – Virtual Location

Below, we’ve broken down the process for you; keep reading to learn how to fake location using Dr. Fone – Virtual Location.

1. Firstly, you have to download Dr. Fone – Virtual Location on your PC. After downloading and installing, launch the app to get started.

2. Select ‘virtual location’ from the options displayed on the main menu.

3. Next, connect your iPhone or Android device to your PC and click ‘get started.’

4. Next, you have to turn on the ‘teleport mode’ by clicking its icon at the upper right corner of the screen.

5. Now, enter the location you want to teleport to on the upper left side of the screen and then click the ‘go’ icon.

6. Click ‘move here’ in the popup box to change your location to this new place.

Automatically, your location will change to the chosen place on the map and your mobile device.

Part 4: FAQ About Turn off Location on Life360

1. Are there any risks to turning off GPS location?

Yes, there are some dangers associated with turning off location on Life360. No one knows where you are anymore, which could be dangerous in the case of an emergency.

2. Can Life360 track my location when I switch My Tecno Pova 5 off?

When your phone is off, your GPS location is automatically disabled. Therefore Life360 won’t be able to track your location; it will only display your last logged location.

3. Does Life360 tell my circle when I turn off the location?

Yes, it does. It will send a ‘location sharing paused’ notification to all your group members. Additionally, if you log out from Life360, it will notify your circle immediately.

Conclusion

Life360 is a useful app for professional and personal circles. However, it can be intrusive on our privacy sometimes. Most times, the youths want to learn how to turn off Life360 without their parents knowing on iPhone and Android devices. This article provides you with different methods you can achieve this. If you want to learn how to turn off life 360 without showing up, the best option is to fake your location. We hope the guide above helps you utilize Dr.Fone - Virtual Location without any issues.

Prevent Cross-Site Tracking on Tecno Pova 5 and Browser

Have you ever wondered why you get the advertisements of the websites you visited a few minutes ago on your social media sites? Here comes to Cross-Site Tracking, also termed CST, and it is a process where third-party cookies and sites track your browser history.

The CST process is like invading your privacy by collecting your browser history and personal information. So, to prevent these services, there are several ways by which you can cross-site tracking on your system as well as Tecno Pova 5 phone browsers. Keep reading to learn how to stop cross-site tracking on both Tecno Pova 5 and browser.

Part 1: Why Do We Need to Stop Cross-site Tracking?

Cross-site Tracking is all about collecting your browsing data and other information for advertising purposes. Though the process can prove convenient for many as it provides additional information about the products and services you have searched for and offers tailor-made content, it is intrusive and about breaching your privacy.

Cross-site tracking collects information about your browsing history. The third-party cookies also monitor the content type you have visited and your personal information, which is risky.

Besides invading privacy, the CST also poses several other issues. Based on your browsing history, additional content you have not asked for is loaded on your visited sites, slows down the page loading process, and puts an extra burden on your battery. Moreover, too much-unwanted content can interfere with the basic information you are looking for.

So, it is always better to prevent cross-site tracking for all the above and more reasons.

Further reading: A detailed guide on faking location in Mozilla Firefox . Don’t worry about your location privacy anymore!

Part 2: Can Private Browsing be traced?

Yes, private browsing can be traced. When you work in private browsing mode, the web browser does not save the browsing history, which means that anyone who uses your system will not check your online activities. But websites and cookies can track your browsing history as well as other information.

Part 3: How to Disable Cross-website Tracking on Safari for iOS Devices?

Safari is the most commonly used platform by iOS users. So, to prevent CST for Safari on your iOS devices and Mac systems, below is a complete guide.

Deactivate Safari cross-website tracking for iPhone & iPad

Safari cross-site tracking can be prevented using the below steps on your iPhone and iPad.

• Step 1. Launch the Settings app on your iOS device.
• Step 2. Find the Safari option by scrolling down the menu.
• Step 3. Move the slider to turn on “Prevent Cross-Site Tracking” under the PRIVACY & SECURITY option.

Deactivate Safari cross-website tracking for Mac

Use the steps below to turn off cross-site tracking on Safari on your Mac systems.

• Step 1. On your Mac system, open the Safari app.
• Step 2. Move to Safari > Preferences > Privacy
• Step 3. Enable the “Prevent cross tracking” option by clicking on the box next to it.

Part 4: How to Disable Cross-site Tracking on Google Chrome

Chrome is used widely on Windows systems and Android devices, and to prevent the CST from your browser, a detailed guide is given below.

Enable “Do Not Track” on Google Chrome for Android

• Step 1. On your Tecno Pova 5, open the Chrome app.
• Step 2. At the right side of the address bar, click on the More option and choose Settings.
• Step 3. Choose the Privacy option from the Advanced tab.
• Step 4. Click on the “Do Not Track” option to turn on the feature.

Enable “Do Not Track” on Google Chrome for Computer

• Step 1. Launch Chrome on your system, and from the menu at the upper-right corner, click on the Settings option.
• Step 2. From the “Privacy and Security” tab, choose the “Cookies and other site data” option.
• Step 3. Tap and enable the slider next to “Send a “Do not track” request with your browsing traffic.”

Part 5: Recommended Solution: Fake a Location to Stop Cross-Site Location Tracking Using Dr. Fone

What if you let the sites and cookies track your phone location without worrying about your privacy? Yes, it can be done by spoofing your location. So, if you set a fake location while browsing the internet, you will not have to worry about cross-site tracking, as anyways, the sites and cookies will get misled browsing information that cannot harm you in any manner.

Setting a fake location on your iOS devices, a professional tool is needed, for we recommend Wondershare Dr.Fone - Virtual Location as the best tool. Using this Android and iOS-based software, you can set any fake GPS location on your device. The tool is simple to use and does not require any mastery of technical know-how.

Key features

• Simple tool to teleport to any GPS location in a single click.
• Allows simulating GPS movement along the route.
• All popular models of Android and iOS devices are compatible.
• Compatible with all location-based apps on your phone.
• Compatible with Windows and Mac systems.

Here is a video tutorial for you to take an overview of how to use Dr.Fone - Virtual Location to fake location on your Android and iOS devices.

safe & secure

Steps to set fake location on your Android and iOS devices using DrFone-Virtual Location

Step 1. Download, install and launch the software on your Windows or Mac systems. On the main software interface, choose the Virtual Location option.

Step 2. Connect your iPhone or Android device to your system using a USB cable and then tap on the Get Started option on your software interface.

Step 3. A new window on the software interface will open, showing your connected phone’s real and actual location. If the detected location is incorrect, click on the “Center On” icon to display the right device location.

Step 4. Next, you need to activate the “teleport mode” and click o the 3rd icon at the upper-right corner.

Step 5. Next, you have to enter now the fake location to which you wish to teleport to at the upper-left corner. Click on Go.

Step 6. Finally, tap on the Move Here button and the new fake location for your connected Android or iOS device at the pop-up box.

Check the new location of your phone from the app.

Wrap it up

Preventing Cross-site tracking can be done on different browsers and devices using the guides listed in the above parts of the article. Settings a fake location for your device using Dr. Fone-Virtual Location is another interesting way to prevent tracking your browsing history by spoofing the sites and cookies. Setting a fake place will not only avoid monitoring your browsing history but will also work with all location-based apps on your phone.

safe & secure